DI Wall Penetration Pipe
For DI piping passing through walls, DI Wall Pipe may be used. All DI Wall Pipe manufactured by C&B Piping are furnished with a wall collar welded continuously on both sides of the collar. This wall collar serves both as a waterstop and a thrust collar.
Fabricated Restrained Joint Closure Pieces
C&B Piping utilizes automated welding machines which use the submerged-arc welding process to apply OEM designed factory restrained joint weld beads onto ductile iron pipe.
Fabricated Victaulic Bolted Sleeve Coupling Closures
C&B Piping provides closure spool pipe connections to be used with restrained bolted sleeve couplings (Depend-O-Lok) manufactured by Victaulic.
TYTON JOINT® Ductile Iron Pipe
C&B provides TYTON JOINT® ductile iron pipe for buried non restrained piping applications. We also apply various linings for water & wastewater which fit the application intended.
TR FLEX® Joint Ductile Iron Pipe
C&B can provide TR FLEX® Joint ductile iron pipe for buried restrained piping applications. We also apply various linings for water & wastewater which fit the application intended.
Threaded Welded Outlets for Pipe & Fittings
C&B Piping manufactures Threaded Welded Outlets onto ductile iron pipe & fittings. These are also known as a Thread-O-Let. They are commonly used on fittings for locations where direct tapping the fitting is not recommended.
MJ HARNESS-LOK Fabricated DI Restraint
The MJ HARNESS-LOK joint is a restrained mechanical joint alternative to gripping style MJ restraints. It is offered in 3”-54” pipe sizes for ductile iron piping systems.
Grooved Fabricated DI Pipe
Grooved Joint ductile iron pipe spools are offered in sizes 3”-36” pipe diameter and lengths up to 20’ 0” long.
Flanged Weld On Bosses for Pipe & Fittings
C&B Piping provides Flanged Weld On Bosses outlets welded onto ductile iron pipe & fittings. The flanged outlets have threaded tapped bolt holes for direct installation of a spool for valve.
Flanged/Fabricated DIP
Flanged Joint ductile iron pipe spools are offered in sizes 3”-64” pipe diameter and lengths up to 20’ 0” long.
HP LOK® Fittings
C&B offers HP LOK® joint ductile iron fittings. We stock them in sizes from 30” – 64” sizes. We stock them as cement lined, glass lined, and Protecto 401 lined. We also apply various exterior coatings for water & wastewater which fit the application intended.
Mechanical Joint Fittings
Mechanical Joint fittings are the industry standard for buried ductile iron piping systems. We stock MJ fittings in sizes 3” – 54” and both AWWA C153 and AWWA C110 specifications. We stock them as cement lined, glass lined, and Protecto 401 lined. We also apply various exterior coatings for water & wastewater which fit the application intended.
TR FLEX® Fittings
C&B offers TR FLEX® joint ductile iron fittings. We stock them in sizes from 4” – 36” sizes. We stock them as cement lined, glass lined, and Protecto 401 lined. We also apply various exterior coatings for water & wastewater which fit the application intended.
Victaulic Grooved Fittings
Victaulic Grooved joint ductile iron fittings are used primarily for above ground ductile iron piping systems. The Victaulic system saves time during installation and provides some field flexibility for some of the common challenges facing the mechanical contractor. We stock Victaulic Grooved fittings in sizes 3” – 36” conforming to the AWWA C606 standard. We stock them as cement lined, glass lined, and Protecto 401 lined. We also apply various exterior coatings for water & wastewater which fit the application intended.
Flanged Fittings
Flanged Joint ductile iron fittings are the industry standard for above ground ductile iron piping systems. We stock Flanged fittings in sizes 3” – 64” conforming to the AWWA C110 standard. We stock them as cement lined, glass lined, and Protecto 401 lined. We also apply various exterior coatings for water & wastewater which fit the application intended.
Sherwin Williams Zinc Corothane I Galvapak 1K
C&B offers Sherwin Williams Zinc Corothane I Galvapak 1K as a shop coat when required. Zinc Corothane I Galvapak 1K is a two component low VOC, moisture cured urethane zinc-rich primer that contains micaceous iron oxide.
Sherwin Williams Macropoxy 5500LT Shop Coat of Protection for ductile iron pipe
C&B offers Macropoxy 5500LT high solids polyamide epoxy as our standard shop coat of temporary protection for exposed ductile iron pipe systems. Macropoxy 646 is recommended by Sherwin Williams to be used as the shop coat for ductile iron surfaces.
Ceramawrap Epoxy Coating for ductile iron pipe
C&B offers Ceramawrap Epoxy Coating for exterior protection of ductile iron pipe and fittings in aggressive atmospheres and liquids. Ceramawrap contains ceramic quartz pigment and amine cured epoxy. It is ideal for aggressive sewage lift stations and saltwater protection for piping on bridges in ocean environments.
Field Repair Kit for CBGL911 Glass Lining
C&B Piping stocks and offers repair kits for CBGL911 Glass Lining. These kits are needed to repair field cut pipe and touch up for fittings and fabrications.
Field Repair Kit for Protecto 401 Ceramic Epoxy
C&B Piping stocks and offers repair kits for Protecto 401 Ceramic Epoxy. These kits are needed to repair field cut pipe and touch up for fittings and fabrications.
Ceramapure PL90 Epoxy Lining for NSF-61 Water
C&B Piping is a licensed applicator of Ceramapure PL90 Epoxy Lining for ductile iron pipe, fittings, and fabrications. Ceramapure PL90 is used primarily for water lining applications where cement lining is not desired. Ceramapure PL90 is NSF-61 approved. Ceramapure PL90 can also be used in wastewater applications. Ceramapure PL90 is also used as an superior alternative to Fusion Bonded Epoxy coatings on ductile iron pipe or fittings. Ceramapure™ PL90 meets or exceeds the compliance standards for AWWA C-210.
Protecto 401 Ceramic Epoxy Lining
C&B Piping is a licensed applicator of Protecto 401 Ceramic Epoxy Lining for ductile iron pipe, fittings, and fabrications. Protecto 401 is the industry standard for protection of ductile iron piping sewer lines where corrosion protection is needed. Since 1981, literally thousands of miles of ductile iron sewer pipe have been lined with Protecto 401.
CBGL911 Porcelain Glass Lining
C&B Piping manufactures CBGL911 Porcelain Glass Lining for ductile iron piping systems. Glass lining is typically used to prevent clogging build up or wear for sewage service lines which contain solids content. Glass lining provides a superior non stick surface.
SURE STOP 350 GASKET
C&B provides the SURE STOP 350® restrained gasket for TYTON JOINT® pipe and fittings. The SURE STOP 350® gasket is available in sizes 4”-24” in diameter.
